基于TLE的弹道系数计算方法及应用分析

针对仅使用两行要素（Two Line Element，TLE）作为数据源的应用需求，研究了基于TLE轨道衰减的弹道系数计算方法。介绍了一种常用的基于两组TLE的直接计算法，分析TLE选取间隔对结果精度的影响；提出了一种基于多组TLE的迭代计算方法，以降低异常TLE对计算结果的影响；从弹道系数计算效果、在再入预报中的应用等方面对这两种方法进行比较分析。结果表明，两种方法各有优劣，基于多组TLE的迭代计算法稳定性更高、受TLE精度的影响更小；由于数据区间更短，基于两组TLE的计算结果对短期轨道衰减特性反应得更准确，用于临近再入时的预报效果更好。     

基于纳米吸能流体的火工点式分离装置缓冲技术研究

运载火箭火工点式分离装置工作时具有强冲击载荷特性，为有效降低冲击峰值，提出了一种基于纳米吸能流体结构的冲击缓冲技术。首先进行纳米吸能流体的吸能原理研究，建立其本构关系，揭示影响其吸能密度的主要因素；其次开展火工装置有限空间内的纳米吸能流体缓冲结构设计；最后通过有限元仿真与试验验证其缓冲性能。试验结果表明，本文设计的基于纳米吸能流体的缓冲结构，吸能密度高达122.8 J/g，冲击力峰值较空载条件下降了59.2%，冲击加速度峰值下降了63.4%。     

An improved numerical method for constructing Halo/Lissajous orbits in a full solar system model

An improved numerical method that can construct Halo/Lissajous orbits in the vicinity of collinear libration points in a full solar system model is investigated. A full solar system gravitational model in the geocentric rotating coordinate system with a clear presentation of the angular velocity relative to the inertial coordinate system is proposed. An alternative way to determine patch points in the multiple shooting method is provided based on a dynamical analysis with Poincare′sections. By employing the new patch points and sequential quadratic programming, Halo orbits for L_1, L_2, and L_3 points as well as Lissajous orbits for L_1 and L_2 points in the EarthMoon system are generated with the proposed full solar system gravitational model to verify the effectiveness of the proposed method.     

Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel

The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. This paper proposes a remote-controlled flexible pose measurement system in wind tunnel conditions for the separation of a target from an aircraft. The position and attitude parameters of a moving object are obtained by utilizing a single camera with a focal length and camera orientation that can be changed based on different measurement conditions. Using this proposed system and method, both the flexibility and efficiency of the pose measurement system can be enhanced in wind tunnel conditions to meet the measurement requirements of different objects and experiments, which is also useful for the development of an intelligent position and attitude measurement system. The position and the focal length of the camera also can be controlled remotely during measurements to enlarge both the vertical and horizontal measurement range of this system. Experiments are conducted in the laboratory to measure the position and attitude of moving objects with high flexibility and efficiency, and the measurement precision of the measurement system is also verified through experiments.     

布雷顿循环和半导体温差联合发电技术在飞行器上的应用

文章针对飞行器燃烧室高温壁面提出了初步的闭式布雷顿循环和半导体温差联合发电方案。首先,建立了简化的理论计算模型,开展了温度场计算分析;然后,根据布雷顿循环发电系统的关键节点温度和半导体温差电材料冷热端温差计算结果,给出联合发电系统的整体发电量和基本性能参数。研究结果为布雷顿循环和半导体温差联合发电系统在飞行器上的应用提供了指导和借鉴。     

Aerodynamic Performance and Aeroacoustic Characteristics of Model Rotor with Anhedral Blade Tip in Hover

Experimental investigation on the aerodynamic performance and aeroacoustic characteristics of model rotors with different tip anhedral angles in hover are conducted in the paper.Three sets of model rotors with blade-tip anhedral angle 0°(reference rotor),20°and 45°respectively are designed to analyze the influence of the anhedral angle on the hovering performance and aeroacoustics of rotor.In the environment of anechoic chamber,the hover experiments under the different collective pitch and blade numbers,are carried out to measure the figure of merit(FM),time history of sound pressure and sound pressure level(SPL)of the three rotor models.Based on test results,the comparison and analysis of hovering performance and aeroacoustic characteristics among the three rotor models have been done.Meanwhile,for the sake of analysis,the rotor wake and blade pressure distribution are simulated by means of computational fluid method(CFD).At last,some conclusions about the effects of blade-tip anhedral angle on the aerodynamic performance and aeroacoustic characteristics in hover are obtained.An anhedral blade tip can enhance the FM of the rotor,and decrease the rotor loads noise to some extent.     

无缓凝剂磷酸镁修补砂浆的力学性能实验研究

磷酸镁水泥(Magnesium phosphate cement,MPC)是一种快速修补型胶凝材料,具备快硬、早强、高强、粘结力强、耐久性好等优点。首先运用正交试验方法,通过控制胶砂比、氧化镁与磷酸二氢盐的物质的量比(M/P)和水胶比,确定了基准MPC修补砂浆的最优配合比。然后研究了粉煤灰和磨细矿渣对MPC修补砂浆抗压强度和抗折强度的影响,分析了其强度特征。结果表明,MPC修补砂浆的最佳M/P比为6∶1,胶砂比1∶1。掺加粉煤灰的MPC修补砂浆具有较高的强度尤其是抗折强度,适宜作为道路与机场道面的快速修补材料。掺加磨细矿渣的MPC修补砂浆,其力学性能不如掺加粉煤灰的MPC修补砂浆。此外,MPC修补砂浆的抗折强度和抗压强度之间具有密切的线性相关关系,且与养护龄期、原材料来源与烧结温度、是否掺加缓凝剂和矿物掺合料、M/P比和水胶比等因素无关。     

拦截高速目标的比例与反比例导引捕获区分析

针对拦截高速目标的作战特点，分析了比例导引(PN)与反比例导引(RPN)的捕获区。首先，通过分析拦截弹与目标的相对运动关系，推导得到了顺轨和逆轨的零控拦截条件，此条件由目标和拦截弹的速度前置角以及二者速度比确定；其次，以拦截弹和目标速度前置角为坐标系，推导得到了PN以及RPN捕获区以及各自导航比设置范围。PN的捕获区由逆轨零控拦截条件以及与其相切且斜率为1/(N-1)的两条直线构成，RPN的捕获区由顺轨零控拦截条件以及与其相切且斜率为1/(-N-1)的两条直线构成；然后，利用函数对称性将PN与RPN捕获区转换到同一坐标区间，得到了相同条件下RPN捕获区要大于PN捕获区的结论；最后，开展了四种情形下的仿真，验证了本文捕获区分析的合理性及有效性。     

Effect of matching between the magnetic field and channel length on the performance of low sputtering Hall thrusters

Discharge characteristics of a non-wall-loss Hall thruster were studied under different channel lengths using a design based on pushing a magnetic field through a double permanent magnet ring. The effect of different magnetic field intensities and channel lengths on ionization, efficiency, and plume divergence angle were studied. The experimental results show that propellant utilization is improved for optimal matching between the magnetic field and channel length. While matching the magnetic field and channel length, the ionization position of the neutral gas changes. The ion flow is effectively controlled, allowing the thrust force, specific impulse, and efficiency to be improved. Our study shows that the channel length is an important design parameter to consider for improving the performance of non-wall-loss Hall thrusters.     

多自由度振动环境下惯组非线性传递特性研究

惯组作为飞行器姿控系统的传感器,其局部安装结构的传递特性的测量精度直接关系到导航精度。目前,惯组普遍使用减振器进行隔振,而减振器都呈现出较强的非线性特征。为了考察惯组在不同工况下的传递特性,将惯组简化为六自由度Duffing模型,推导了基础激励下系统的运动微分方程,并用龙格-库塔法对方程进行求解,分析了自由衰减振动和强迫振动下不同工况的系统传递特性。结果表明,多自由度激励比单自由度激励工况得到的系统传递特性的频率和幅值都低。考虑到惯组真实的使用环境,应当在多自由度振动环境下进行传递特性试验。